|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PAINTABLE MOLD RELEASES
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ZIP - The Molder's Edge release agents are specifically formulated as anti-stick lubricants for molded materials such as plastics, rubber, waxes, and similar materials. Simply spray on molds for fast, easy part removal and multiple part releases per application. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Organo Paintable Mold Release
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Best performing paintable release gives the most part releases in many applications.
- Specially formulated as a paintable release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials.
- UL Recognized.
- Dry-mist coating reduces mold build-up.
- Allows molded parts to be painted, plated, labeled, or bonded after molding in most applications.
- Gives molded parts a satin finish.
- Heavy-duty silicone formula gives multiple part releases per application.
Item No. ME-263E
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Paintable Mold Release
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Paintable non-silicone formula gives multiple part releases per application.
- Specially formulated as a paintable release agent and anti-stick lubricant for nylons and other molded materials such as plastics, rubber, waxes, and more.
- UL Recognized.
- Excellent release for virtually all resins. Especially good where parts will be cemented or painted with solvent based paints.
- The release agent in ZIP ME-514E meets FDA regulation 21 CFR 178.3570 for use of lubricants with incidental food contact.
Item No. ME-514E
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Paintable Mold Release
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Heavy-duty synthetic, paintable formula gives multiple part releases per application.
- Specially formulated as a paintable release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials.
- Non-silicone synthetic, high temperature release agent and lubricant.
- Allows molded parts to be painted, plated, labeled, or bonded after molding in most applications.
- Stable to 400°F. Will not carbonize or form sludge or varnish. High film strength and good load qualities.
- Ideal as a lubricant for rubber and textile manufacturing. Can be a defoaming agent.
Item No. ME-345E
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Click here for Specialty Mold Releases
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
© 2000, Stoner Inc. All rights reserved.
|
|
|
|
|
|
|
|
|